top of page

CADIS was designed first and foremost to satisfy discriminating expectations for state-of-the-art installations in stadiums, theaters, clubs, and civic centers. It is noteworthy not only for its extraordinary flexibility and sonic performance, but also for the ruggedness of its components. The mid/ high unit sports a housing made of polyamide resin, an especially durable, weatherproof space-age plastic. This resin also happens to be remarkably anti-resonant; hence the units’ excellent acoustical properties. Inconspicuous installation is easy and convenient courtesy of its unobtrusive yet upscale design and the handy three-point rigging system. Black and white models are standard, and versions in any RAL color can be special-ordered. Simulation software and the requisite specifications (Ease Focus 2) are included with the CADIS system.

CAD 208

This professional 2 1/2-way speaker system serves to set up vertical arrays that project a wide wave-front across the entire audience area. Two 8“ loudspeakers are mounted in a precision-tuned polyamide housing. Two 1“ HF drivers are coupled to two CD horns with 100° horizontal and 15° vertical directivity. The tough polyamide housing is weather- and UVresistant. It comes in black or white, though other RAL colors are available on demand. The fully integrated rigging hardware is adjustable from 0° to 15° in 1.5° steps. The front grille is made of steel.


The HK Audio FirNet Controller or HK AUDIO DSM 2060 Controller paired with VX2400 power amps serve to drive these speakers. Frequency response ranges from 75 Hz to 18 kHz (+/-3 dB), with 95 dB axial sensitivity (one unit) @ 1W/1 m under full-space conditions and 130 dB maximum SPL at 10% THD. Power handling is 250 watts RMS per unit; nominal impedance is 8 ohms.


Connectors: Optionally either two NL4s for the passive or NL8s for the triamped version, Barrierstrips, or PG glands with terminals inside

Dimensions (W x H x D):57.8 x 23.8 x 37.3 cm

Weight:17.5 kg with passive x-over, 16.4 kg without internal x-over

Accessories:Rigging/stacking frame, connector frame for flying mid/high units in an array with subwoofers on top, wall mount, ceiling mount

Type:HK AUDIO CADIS CAD 208 mid/high unit

The Simulation software for CADIS is EASE FOCUS


CAD 208

Power-handling nominal (RMS)

250 W RMS, 500 W Prog.

Frequency response +/- 3 dB

75/ 100 Hz – 18 kHz (depending on controller & length)

Nominal impedance

8 ohms

Sensitivity 1W

95 dB Full space 101 dB Half Space


2 x Speakon NL 4 (standard) - External terminal

(optional) - PG gland, internal terminal (optional)


2 x 8“ speaker

HF Driver

2 x 1“


2 ½ way passive

Subsonic filter

Crossover Controller

Crossover frequency

1,8 KHz, 12 dB/ octave

Rigging points

Integrated 3-point






schwarz oder weiß optional weitere RAL Farben erhältlich

Dimensions (WxHxD)

57,8 cm x 23,8 cm x 37,3 cm


17.5 kg (35.35 lbs) passive, 16.5 kg tri-amped (without internal passive Xover)

Loaded with a 15“ neodymium speaker in a precisiontuned bass reflex housing, this professional-grade subwoofer delivers powerful, direct and remarkably dynamic response. The cubeshaped enclosure is made of 18-mm birch multiply coated with black or white lacquer. Other RAL colors are optionally available. A rugged steel grille backed with laminated acoustic foam rubber protects the front. Embedded rails attach the enclosure to a rigging frame and accept a connector frame for use with CAD 208 mid-/ high-range units. Frequency response ranges from 47 Hz to 150 Hz (+/- 3 dB), with 102 dB axial sensitivity @ 1W/1 m under half-space conditions and 135 dB maximum SPL at 10% THD under half-space conditions. Power handling is 600 watts RMS


Connectors:Two NL4 Speakon

Dimensions (W x H x D): 58.3 x 55.3 x 64 cm

Weight: 38 kg

Accessories: Rigging/ stacking frame, connector frame, dolly with four 100mm casters


Title CAD 115 Sub
Power-handling nominal (RMS) 600 W RMS
Frequency response +/- 3 dB 47 Hz- 150 Hz
Frequency response -10 dB 42 Hz- 150 Hz
Nominal impedance 8 ohms
Sensitivity 1W 96 dB (50 Hz- 200 Hz) Full space 102 dB (50 Hz- 200 Hz) Half space
Maximum SPL, @ 10% THD 122 dB@10% THD Full-Space (60 Hz–150 Hz) 128 dB@10% THD Half-Space (60 Hz–150 Hz)
Connections 2 x Speakon NL 4
Speaker 1x 15“ neodymium woofer
X-Over via external controller
Enclosure 18 mm birch multiply
Grille Metal
Gross dimensions 58.3 x 57.3 x 64 cm
Weight 38 kg (76.76 lbs)


Technical Specifications

Technical Specifications

bottom of page