top of page

X

HK Audio’s new COSMO line array system combines state-of-the-art audio quality with ingeniously simple handling, utmost utility and remarkable economy to provide an extremely flexible, easily configurable PA for professionals.

​

COSMO raises the performance bar for line arrays, setting a whole new standard for productivity and efficiency. Integrative and versatile by design, it delivers measurably higher effective SPL in the HF range than comparable systems. With horizontal directivities of 100°, 80° and 60°, this upcoming family of ultra flexible systems will provide the bandwidth needed to cover the most diverse live scenarios.

C 10

  • Narrow, tightly focused pattern for accurate longthrow coverage

  • Asymmetrical pattern can be extended in a modular way by adding C8 and C6 units

  • Minimum distortion, unrivalled in its class, for exceptionally high effective sound pressure levels

  • No adapters needed, so no gaps when combined with C8 and C6 – this makes it the perfect option for the top section of a large mixed array

  • Far fewer components cover all FOH system requirements for most users

  • More mileage and gigging time out of each component

  • Simplified storage and logistics

  • Easier handling, faster to set up and tear down

  • Much smaller footprint in the warehouse

  • A lot less training – once is enough, rather than three times for three systems

  • Better long-term investment – one system builds on the next and may be extended in small steps

  • Far lower cost of ownership, far higher return on investment

C10

Technical Specifications

Low/Mid Speaker2x 10"

HF Driver1.4" B&C with 3" voice coil

Directivity60° horizontal

Connections2x Speakon NL4

Rigging points3-point rigging hardware

Handles4x ergonomic handle

Enclosurebirch multiplex

Grillesteel front grill with anticorrosive coating, acoustic foam

FinishPU coating

C 6

  • Wide throw pattern and relatively low height make it the perfect choice for venues where the first audience row is close to the stage and speakers are flown below 6 m

  • Top-of-the-class fullrange performance, so it is very well suited for public address applications and venues that cannot accommodate separate subwoofers

  • Also a great choice for pop and rock gigs when combined with subwoofers

  • No adapters needed, so no gaps when combined with C10 and C8 – this makes it the perfect option for the bottom section of a mixed array

  • Far fewer components cover all FOH system requirements for most users

  • More mileage and gigging time out of each component

  • Simplified storage and logistics

  • Easier handling, faster to set up and tear down

  • Much smaller footprint in the warehouse

  • A lot less training – once is enough, rather than three times for three systems

  • Better long-term investment – one system builds on the next and may be extended in small steps

  • Far lower cost of ownership, far higher return on investment

C6

Technical Specifications

Low/Mid Speaker2x 6.5"

HF Driver1.4" B&C with 3" voice coil

Directivity100° horizontal

Connections2x Speakon NL4

Rigging points3-point rigging hardware

Handles4x ergonomic handle

Enclosurebirch multiplex

Grillesteel front grill with anticorrosive coating, acoustic foam

FinishPU coating

C8

  • With its medium-wide throw pattern, the C8 is suitable for a broad range of applications

  • Asymmetrical pattern can be extended in a modular way by adding C10 and C6 units

  • Minimum distortion, unrivalled in its class, for exceptionally high effective sound pressure levels

  • Top-of-the-class fullrange performance

  • Very well suited for loud pop and rock events when combined with subwoofers

  • No adapters needed, so no gaps when combined with C10 and C6 – this makes it the perfect option for the middle section of a large mixed array

  • Far fewer components cover all FOH system requirements for most users

  • More mileage and gigging time out of each component

  • Simplified storage and logistics

  • Easier handling, faster to set up and tear down

  • Much smaller footprint in the warehouse

  • A lot less training – once is enough, rather than three times for three systems

  • Better long-term investment – one system builds on the next and may be extended in small steps

  • Far lower cost of ownership, far higher return on investment

 

C8

Technical Specifications

Power-handling nominal (RMS)600 W

Power-handling, program1200 W

Power-handling, peak2400 W

Nominal impedance8 ohms

Max SPL122 dB (E DIN EN 60268-21:2018-04)

Max SPL calculated142 dB

Sensitivity 1W/1m104 dB (100 Hz - 10 kHz), full space

Frequency response +/- 3 dB63 Hz - 18 kHz

Frequency response -10 dB57 Hz - 19 kHz

Low/Mid Speaker2x 8" SICA neodymium with 2.5" voice coil

HF Driver1.4" B&C with 3" voice coil

Directivity80° horizontal

Crossover frequency800 Hz, 24 dB/oct

Connections2x Speakon NL4

Rigging points3-point rigging hardware, curving in 1° steps, 1° - 10°

Handles4x ergonomic handle

Enclosurebirch multiplex

Grillesteel front grill with anticorrosive coating, acoustic foam

FinishPU coating

Dimensions (WxHxD)60 x 27 x 45 cm

Weight25 kg / 55,1 lbs

CF 118

  • Compact, direct-radiating, high-performance 1x 18“ subwoofer in 60 cm COSMO format

  • Flyable version of the CS 118

  • Remarkably efficient and able to handle a great deal of power, with unusually expansive dynamic headroom ranging down to the lowest frequencies

  • Perfect for all applications where bass bins cannot be stacked

  • May also be stacked on the ground with COSMO and CONTOUR X components

  • Far fewer components cover all FOH system requirements for most users

  • More mileage and gigging time out of each component

  • Simplified storage and logistics

  • Easier handling, faster to set up and tear down

  • Much smaller footprint in the warehouse

  • A lot less training – once is enough, rather than three times for three systems

  • Better long-term investment – one system builds on the next and may be extended in small steps

  • Far lower cost of ownership, far higher return on investment

CF118

Technical Specifications

Power-handling nominal (RMS)1600 W

Power-handling, program3200 W

Nominal impedance8 ohms

Max SPL121 dB (E DIN EN 60268-21:2018-04)

Max SPL calculated135 dB

Sensitivity 1W/1m91 dB (30 Hz - 100 Hz), full space

Frequency response +/- 3 dB35 Hz - 120 Hz

Frequency response -10 dB31 Hz - 120 Hz

LF Speaker1x 18" Beyma neodymium with 4" voice coil

Connections2x Speakon NL4

Pole mount1x M20

Rigging points4-point rigging hardware

Handles4x HK Audio MultiGrip

Enclosurebirch multiplex

Grillesteel front grill with anticorrosive coating, acoustic foam

FinishPU coating

Optional accessoriescover, caster board

Dimensions (WxHxD)60 x 61 x 78 cm

Weightapprox. 52 kg / 115 lbs

 

bottom of page